What Kind of Microwave Oven Should I Get?

A microwave oven is an electronic kitchen appliance used for reheating the food and cooking a variety of food items.

One of the first questions, when you want to start baking, think which oven is best for me, if I buy a convection microwave, an OTG or some other?

Which is the best oven for a beginner?

Few things you would need to know and a few things to consider before you buy a microwave oven for a lifetime.

Broadly speaking, if you would go for the counter-top ovens, the kind which sits on the counter of your kitchen, or also you would go for the built-in ovens, the kind which is built into the wall of your kitchen.

Again in the countertop ovens, you could go in for a convection microwave or go in for an oven toaster griller which is commonly called an OTG.

Built-in ovens again could be either convection microwaves or gas-operated ovens or electric ovens.

So, when you plan to buy a Microwave oven, here are some things to consider. 

• The capacity of the oven
• Level of interest in baking
• The space you have to accommodate
• The budget and after-sale service available in your city for the brand.

    Convection Microwave Oven

A convection microwave oven can cook, reheat, grill food and bake your food as well. So this is one compact gadget that does it all. It’s really simple to use, bakes your food evenly all the time.

Microwaves normally come with digital control and display, a feature I love and appreciate. But microwaves can be quite heavy, so you can't change or move them. Therefore, you should have enough space on your kitchen counter reserved for this oven.

The maximum capacity of the microwave could be around 32 liters, and if you go in for a microwave of this capacity, you could easily bake for a family of 4.  A convection microwave can cost upwards of 15,000 depending on the brand, capacity and the model you are buying and of course, you are buying it online or offline.

Drawback:

• One major drawback of the convection microwave is that it is limited by capacity. You can bake only on one grill and one level at a time. Which means you can bake one cake or one cookie sheet at a time.
• You cannot use some large standard-sized baking cans in a convection microwave, especially rectangular ones, because the can will continue to hit the microwave walls.
• So if you entertain very often or if you aspire to bake commercially, the limited capacity of a convection microwave may prove to be a serious drawback.
• So be sure to go to the store, take a look at the various models available, and also read the comments on the model you plan to buy.

     Oven- Toast Griller (OTG)

Oven-Toast Griller or which is commonly called as an OTG. You can bake your food and even keep it warm.

But you can’t really use it for cooking or reheating your food, which means that if you have an OTG, you would still need to have a microwave to cook and reheat your food, which means additional counter space in your kitchen to house both the gadgets.

• OTGs are quite lighter in weight, which means that you move it around, and you could also shift it as and when you need it. OTGs normally come with manual controls.
• This will cost you 9000 upwards depending on the brand, capacity and the model you are buying and of course you are buying it online or offline.
• The capacity of the OTGs normally goes up to 60 liters that could bake more at a time; you could bake 2 cakes or 2 sheets of cookies and even bake on 2 levels at a time.
• So the minimum size I would like to suggest if you are going to buy an OTG would be about 40 liters.
• Bigger OTGs come with different modes for baking as well, so be prepared to spend some time in figuring out what works best for you and how your oven works.

      Built-In  Ovens

Coming to built-in ovens, there are microwaves; there are electric ovens and then gas ovens which come as part of the cooking range. So these are a different deal altogether as they are built into the wall of your kitchen as the name suggests.

• Built-in ovens are really elegant, and stylish and also come with a bigger price-tag.
• This could cost you anywhere between 25,000 to 1,00,000 upwards for premium brands. 
• But if you are happening to live in smaller towns, I would suggest you to be especially careful with the after-sale service if you are going for built-in ovens.

Therefore, there is no perfect choice for a Microwave Oven, as it would vary according to the different parameters and their individual requirements.

I would like to suggest starting with an OTG or convection microwave oven when you start and then upgrade to the built-in ones later depending on your level of interest in baking.

If you are facing any type of problem with your Microwave Oven, Contact the Best Microwave oven service center nearby you.

How to fix Washing Machine Drain Problems?

Drainage problems with a washing machine fall into one of two categories: either the water will not drain out of the washing machine, or the water will leave the machine, but it cannot flow properly through the drain pipes. Several different specific problems can cause these general problems, and diagnosing them can be a complicated matter. Some of the problems you can solve yourself, while others will probably require a call to an washing machine service center.

Drainage problems can vary from being as simple as an obstruction in the drain hose to the need to replace a pump. But one thing is certain, when you have a problem with drainage you will be very attentive. . . The disaster on the floor may be your first and only clue!

Drain Hose

Many times a clogged drain hose is the reason why your washer is not draining properly. Remove the hose and visually inspect it for obstructions. A garden hose can be used to remove any stubborn obstruction of the hose.

You can Remove the drain hose from back of the washer. Run a stream of moderate to high pressure water through it. If it is clogged, this should force the obstruction. Replace the hose in the washer by following these simple steps: the outlet is not more than 2.8 feet (85 cm) from the floor; the end of the hose has no more than 4.5 inches (11.4 cm) inside the drain hole; the drain hole is not closed with adhesive tape; and the hose is not bent. Then run a rinse / spin cycle. If it still does not drain, continue with the next step.

Drain Pump

If you suspect your drain pump is clogged, you should drain the tub and then disconnect and inspect the hoses for foreign objects. Don’t forget to check the pump inlets. You may need to remove the pump from the washer in order to see it well.

If you have problems with your pump, there is a possibility that it has been locked. The engine will continue to run and try to start the pump. If the pump runs on a belt, the belt will burn or break, there is even a possibility that the pulley will break. Things can go from bad to worse if the engine continues to run with tension in the belt, which can cause the engine to seize.

Another possible problem could be that the bearings have clung to the pump or got stuck with a pen, coin or sock. It is also possible that the impeller blades have broken. In most cases, a new pump will solve the problem.

Drive Belt Problems

The pump is operated by a drive belt that fits around the pulleys at the bottom of the washer motor. If this belt is broken or not tight on the pulleys, the washer will have difficulty draining or may not drain at all. Fixing this will require you to turn the machine sideways to examine the belt. Homeowners can do it themselves, although many choose to have a repair person take care of a repair of this level.

Plumbing System Problems

If the water successfully leaves the machine but then spills out of the drain support tube or goes back into the bathtub, then the problem is probably a traditional drain obstruction. Because small cloth fibers are regularly washed through the system, it is common for drainage obstructions in the plumbing pipes in which the washer drains. A clogged drain causes water to return to the vertical pipe and spill on the floor. Cleaning the clogged drain will usually solve the problem.

If you think, you need an expert technician for you washing machine service, Call the Doorstep Hub at +91–88866 88666. You will get the service on the same day.

How Do I Fix a Microwave That's Not Heating? Microwave Oven Repair Services

The microwave is one of the most used electronic devices these days. Most people, regardless of location, have a microwave for cooking and heating. Microwaves are easy to use, take up less space and serve several purposes. However, due to their constant use, they may begin to show certain failures from time to time. For example, you can stop the warming and there could be many reasons or causes for this. If your microwave does not heat up, you can go through the following causes and probable solutions.

• High Voltage Diode
• Door Switch
• Magnetron
• High Voltage Capacitor
• Thermal Fuse

High Voltage Diode

If your microwave does not heat up, you may have a problem with the high voltage diode or rectifier. This component helps provide the high voltage that powers the magnetron. The high voltage diode is near the magnetron and the high voltage capacitor, so access will require removal of the cabinet. Turn off the power and also discharge the high voltage capacitor to avoid electric shock. You can then test the continuity of the diode with a multimeter. The diodes are polarity specific and you should see a low resistance with the meter wires in one direction and a higher resistance when the meter wires are reversed. Most multimeters will have a special configuration for diodes or rectifiers. If the high voltage diode shows low resistance in both directions or shows no continuity at all, then it must be replaced. If you find that high-voltage diode tests are fine, then you must determine if power is being supplied to the circuit. This is a high voltage circuit and additional tests should only be performed by a qualified microwave oven repair technician.

Door Switch

Another possible cause when the microwave does not heat up is a problem with the door switch. The door switch is also known as the interlocking switch and can be accessed by removing the cabinet. For this, first disconnect the microwave and then try a multimeter. Press the actuator button and check the switches. If you do not find continuity at this point, you may need to replace the switch. In addition, when testing this, you must ensure that the door hooks as this activates the door switch work properly.

Magnetron

If your microwave does not heat up, then the problem could also be in the magnetron. Magnetron is an important part of the microwave and is responsible for providing the heat that cooks food. If the magnetron breaks, this can cause the fuse to explode, which could cause other components to fail. To verify the magnetron, disconnect the microwave and then remove the cabinet. After this, discharge the high voltage capacitor. While testing the magnetron, disconnect the connected wires and connect the multimeter wires to the magnetron terminals. The continuity you get should be approximately 2-3 ohms of resistance between the terminals, as well as the grounded outer shell. If this is normal, then the problem could be something else.

High Voltage Capacitor

Microwave ovens produce a very high voltage to power the magnetron antenna, which emits the energy that cooks food. When a high voltage transformer fails, an arc will usually form and have a burning smell. (Warning: the microwave oven can store a lethal amount of electricity in your high voltage capacitor, even after the microwave oven has been unplugged. Due to the high operating voltage and the possibility of electric shock, it is extremely dangerous to replace the electronic components in a microwave. Only a licensed technician should replace the high voltage transformer.)

Thermal Fuse

The thermal fuse cuts power to the microwave if the microwave overheats. To determine if the thermal fuse has blown, use a multimeter to test its continuity. If the fuse has no continuity, replace it. The thermal fuse can’t be reset; if the fuse is blown, it must be replaced.

After testing all the above solutions, if you think you need an expert technician to repair your microwave oven, Call the Doorstep Hub at +91-88866 88666 and get the service(microwave oven repair services) on the same day.

How to Get Rid of Bed Bugs? Nearby Pest Control Services

Bed bugs are also excellent hitchhikers. Not only can they travel the world, but they are very good at moving from one place to another, from one room to another room, or from that used furniture that they picked up at a garage sale to the rest of their home.

Bed bugs feed mostly came at night time when the person is in asleep. The bites cause small, hard, swollen skin rashes that can become inflamed and itch severely. There are five youth stages that lead to adult bedbugs. Adults are approximately 6 mm long, reddish-brown with juveniles (nymphs) similarly but lighter in color and smaller. The eggs are approximately 1 mm long, white to cream and low pear-shaped. They are well hidden and not always obvious.

The most effective way to control bed bugs in your home is through a combination of chemical measures and heat treatments applied by a pest control professional (PCP).

Controlling bed bugs is only very difficult and time-consuming. It involves moving furniture, household items, and personal items. Plan how you want to treat each room or call a pest control service near you.

Where the Bed Bugs can hide?

Bed bugs prefer to hide in cracks and crevices during the day and go out at night to feed on their victims. The blood meal lasts three to five minutes and the victim usually goes unnoticed; as the person is asleep! After feeding, the bite can become inflamed and itch severely in sensitive people. In extreme cases, there may be a severe allergic reaction that requires urgent medical treatment.

The cryptic nature of bed bugs and their ability to hide in small inaccessible spaces means that they will be protected from pesticides unless they are fully and correctly applied. Eggs are not affected by pesticides. Both features have significant implications for treatment.

Diff Signs of Bed Bug Infestation

• Irritated skin and irritation caused by bites.
• Shed skins and bed bug feces in refuge areas.
• Bloodstains on the bed, the mattress, the base, walls and furniture.

Bed bug Treatment Program like:

• Inspection of the premises, room by room
• Treatment of the affected rooms
• Follow up inspection of treated areas

The first essential step in the management of bed bugs is the identification of pests and determining the extent and level of infestation. Site inspection is crucial. When this is known, the Doorstep Hub’s pest control technician can evaluate the treatment options and the time needed for the treatment.

After inspection and before treatment, washing the affected surfaces with bloodstains not only improves the appearance but also allows for a follow-up inspection with greater confidence. In extreme cases, it may be better to discard the mattress; it is recommended to burn or dump, making sure that other items are not infested. Care must be taken when moving the affected items; it is recommended to seal them in plastic bags before they leave the room. Bedding should be washed in hot water followed by a hot dryer. Sensitive materials can be placed in a freezer, allowing enough time for the entire volume of the item to reach the freezer temperature.

Don't waste your money and more disposed risk accepting cheap remedies. Call the near by pest control professionals and get good service.

What causes a washing machine not spinning?

The spin mechanism and the drainage system are connected. Then, if the drain does not work, the machine will not turn. The pump filter may be blocked or the drum hose that goes to the pump may be blocked. The carbon brushes of the motor may be warned, if the motor does not have brushes, then there is a possibility that the motor capacitor has failed. There may also be a case where the motor belt to the drum can break or come off.

Do you have problems with the washing machine? Do not panic! Before calling a professional washing machine technician for your washing machine services, here are some simple ideas to try, which could solve some of the most common problems of the washing machine. Before you start, make sure you have the manual for your washing machine, not everyone knows exactly where the pressure switch or water pipes are!

Checking your washing machine's manual is always a good idea to help you solve what might be wrong with your machine.

Some top-loading washers use a direct drive motor coupling to transfer power from the engine to the transmission. The transmission coupling connects the engine to the transmission and consists of two plastic transmission forks with a rubber coupling between them. One of the drive forks is attached to the drive motor shaft and another one is attached to the transmission input shaft. As the motor shaft rotates, the rubber coupling between the transmission forks absorbs torque to prevent the forks from breaking. Normal use will create wear on the coupling and, finally, the transmission forks may slip and not engage the transmission and clutch. A common symptom of a faulty motor coupling is that the washer fills and drains normally but does not stir or spin.

Steps to check if your Washing Machine Not Spinning?

1. Is the load unbalanced?

If you have washed a lot of heavy bath towels, a weight imbalance can affect the sensors. Try to wash a combination of large and small items so that everything works.

2. Are the outlet pipes blocked?

If the outlet pipes are blocked, the water will not drain and the spin cycle will not start. If you have a smelly washer, this may be a sign of blocked drain pipes.

3. Is the pressure switch faulty?

The pressure switch tells you the machine that the water has been drained. You can test your switch by blowing on the tube and listening to a "click" sound.

Clutch Assembly:

Some top-loading washers use a clutch assembly to block the transmission input shaft to the wash basket drive during the spin cycle. Over time, repeated friction of the clutch pads that rub against the housing can cause clutch wear and create a scraping sound. A worn-out clutch can prevent your washer from rotating or may cause a slower spin speed that will leave your clothes wet after one cycle. Additional symptoms that the clutch may be causing its problems are brake dust or chips that are under the washer, a slight burning smell or a loud noise during the spin cycle.

Spin belt:

The spin belt is used to connect the transmission engine to the transmission in some top-loading washers, or the transmission engine to the washing basket in most front-loading washers. If your washer does not spin, you should inspect the spin belt for signs of overheating or excessive wear. Before replacing a damaged belt, you should verify that any belt tensioning device, such as a crazy pulley or motor slip, is functioning properly and moves freely. In top-loading washers, you should also verify that the drive pulley rotates freely in the directions of rotation and agitation and that there is nothing that prevents the movement of the agitator or the wash basket that can cause the belt to slide over the pulleys You should also check for signs of oil or water leaks in the belt or pulley area. In front-loading washers, make sure the bathtub rotates easily by hand.

If you need any type of washing machine service at home, Contact Doorstep Hub for fast services. For more details Call +91-88866 88666.

How do I stop my fridge from making noise? Refrigerator Repair Service

The refrigerator is the most significant appliance in your home. We depend on them all day, every day to preserve foods and keep them fresh. The refrigerator reduces bacterial growth. Bacteria live everywhere in nature. Mostly they are present in the foods we eat. When they have food, moisture, and pleasant temperatures, they grow quickly, growing in numbers to the point where some types of bacteria can cause sickness. Bacteria grow faster in the temperatures that range between 40 and 140 °F. A refrigerator temperature set at 40 °F or below will protect most foods.

When your refrigerator is noisy there can be various causes for the noise. Most of the sounds you will hear from a new or old fridge is normal operating sounds. Some sounds from your refrigerator can be fixed by making a small adjustment to the fridge. Best refrigerator repair services provided by Doorstep Hub.

How to Reduce Refrigerator Noise:

Humming Noise:

This sound is quite normal and is actually a good sign. It means that your fridge is running totally normal, so it’s really a major problem if you don’t hear this noise. What you’re hearing is the compressor running, which is switched on between 60 to 80 percent of the time. There isn’t any way to get rid of this noise. Overall, it shouldn’t be too disturbing, although everyone has different levels of noise tolerance.  instead, you could upgrade to a newer fridge freezer. The most advanced models have linear compressors which are switched on all the time, so you’re less likely to notice the gentle hum. Although they are more expensive than older models, they are considerably quieter.

A loud noise is hearing from your freezer:

If your fridge freezer starts with making loud, unusual noises, first you try to locate the source of the sound first. Open the freezer door; if the noise is louder after doing so, there is a much chance something’s faulty with your circulating fan. If you notice no difference, then check the compressor for noise, it’s the black unit on the back of your fridge with various wires and tubes leading to it. If this is the source of the sound, you’ll need a replacement.

Scraping or whirring Noise:

If you have a frost-free fridge freezer and are hearing whirring or scraping noises, this usually indicates a build-up of ice around one of the fans. If this is the problem, you’ll also notice your fridge is not as cool as it has to be. You could have a faulty fan motor.

First, inspect fans before calling a repairman. Start by shutting off your appliance, then check for waste that could be disrupting airflow and keeping your fan from moving freely. If you spot any obstructions, use a soft-bristled brush to remove them. Reconnect the power, and if the sound persists, replace the fan.

Rattling Sounds:

If the drain pan under your fridge has got loose, it will produce an annoying rattling noise. Luckily, this can be easily fixed. All you have to do is tape the pan in place with heavy-duty duct tape.

Dripping Sounds:

This is simply the sound of defrosted water dripping into the pan under your fridge, as such; it’s no cause for concern.

Buzzing Sounds:

If your fridge has a water and ice dispenser on the door, you may notice a buzzing sound whenever you use it. Again, this is perfectly normal; no repairs are needed.

If you notice any other strange noises, and your fridge performance degrades as a result, it’s better to be safe. Call a certified technician or Refrigerator service center to inspect the problem, and get an extended service warranty.

How to Fix a Noisy Washing Machine? Washing Machine Repair Services

If your washing machine is making an unusual noise like knocking or scratching, how they likely to be and how to deal with it.

The first thing is first; unplug your washing machine before doing any sort of maintenance.

One of the common causes of strange sounds in your washing machine is due to objects getting into the drum that shouldn't be there. Our research has shown us that the main culprits are coins and bra wire.

To test the effects of items in the drum,

Check with the Door Seal and Drum:

• Our search showed us that most of the items will, in fact, stay in the drum or catch in the door seal. Items that stay in these areas, can do damage over time but the risk is that they will fall below the seal, between the drum and the outer plastic tub. Items that get here can potentially write off your washing machine.
• Solid items that do make their way between the drum and the tub can make an excessively loud noise during a wash cycle. But when rotating the drum by hand you may not hear anything at all.
• If you do suspect that you have an item between the drum and tub. Stop the machine and call for washing machine service repair.
• If a broad wire has ended up in your wash and if you're lucky it might catch in one of the holes inside the drum. So if you hear a scratching sound, have a look inside the drum, and see if you can fish it out.
• Finally, any metal items that get caught in the seal or drum, and remain undetected can rust over time and pass on that stain to your clothing.  

Check with Lint Filter:

• Some of our items made it down here, to the lint filter. If you suspect something is caught in the filter, you need to check it. Firstly remove the plastic cover, before undoing your lint filter make sure you have a shallow container in place to catch the water, or if you haven't got one to hand, lay down a towel.
• If your machine has a drain hose then pull it out from its housing, and remove the cap. Once this is drained, there shouldn't be much water left in the lint filter. If your machine doesn't have a drain hose, lay a towel out and slowly undo the lint filter. Once you've got your filter, remove any item from within it, and remove any items that have also caught in the housing. 
• If you notice that your filter is a bit moldy and grimy, now would be a great time to give it a quick wash. Once the filter and its housing have been cleared of debris, just screw the filter back in.
• If your washing machine is making any peculiar or strange noises, then turn it off by stopping the washing program. You can find out how to do this by checking your instruction manual.

If your washing machine is noisy and is unlike anything that has discussed then you can contact nearby Washing Machine Repair Services.

What causes a refrigerator to not get cold enough? Refrigerator Service at Home

A refrigerator is one of the common household appliances that consist of a thermally insulated compartment and a heat pump that carries heat from the inside of the fridge to its outside environment so that the inside of the fridge is cooled to below the room temperature. The first reason for having a refrigerator is to maintain food cold. Cold temperatures help food stay fresh for longer.  The idea behind refrigeration is to reduce the activity of bacteria (which present in all food items) so that it takes more time for the bacteria to spoil the food. Refrigeration is provided by refrigerators that use a refrigerant chemical to take away heat from things that are stored inside the system.

For example, bacteria will spoil vegetables in two or three days if the vegetables are left out on the kitchen counter at room temperature. However, by reducing the temperature of the vegetables, it will stay fresh for a long time -- the cold temperature inside the refrigerator decreases the activity of the bacteria that much. By freezing the vegetables you can stop the bacteria altogether and the vegetables can last for months. If you need any refrigerator service at home Call Doorstep Hub.

If you notice that your fridge is not cooling, the first thing you need to do is clean the dirty condenser coil.

Dirty condenser coils:

When the condenser coils at the back, the top or the bottom of the refrigerator gets dirty, which leads to several issues. For example, one of the causes is that the appliance does not cool properly. This is because the compressor is not running efficiently due to the dirt that is covering the coils. Since the compressor makes the refrigerants to heat up, they need to cool down as well. If the refrigerator condenser coils are dirty, then the refrigerant flowing through the coils cannot lose heat efficiently. The dirt acts as an insulator and does not allow the heat to evaporate or disappear.

Another effect is that the compressor does not finish its cycle, and is therefore constantly on. Constant compressor consumes up a lot of energy, thus increases the electric bills. Sometimes, the compressor may still turn off, but it quickly turns on again. This abnormal quick transition of cycles is an indication that there is something wrong with the condenser coils.

Dirty condenser coils result in the compressor to overheat. Overheating leads the compressor to stop working, and accordingly, the entire refrigeration process stops as well. Before you call the refrigerator service repair center, the solution to these problems are to clean the dust and grime that is holding to the condenser coils.

Cleaning the condenser coil:

Before cleaning the coils of the refrigerator do remember that you need to unplug the refrigerator or turn the power off completely.  The Dirt on condenser coils can be removed by using a condenser coil cleaning brush and a vacuum cleaner. Now you need to remove the grill from the bottom of the refrigerator. Take a flashlight and look at the dust that is present underneath the coils. If there is dust, now remove the dust just by moving the condenser coil cleaning brush front and back gently and then use the vacuum cleaner to remove the dirt that is sticking to the condenser coil. It is recommended to clean the condenser coils once in six months.

Even though your fridge is not getting cool then a certified technician has to inspect it or you can consult refrigerator home service near me Hyderabad and Bangalore.